5 Tips For Heating a Victorian House With Energy Efficient Solutions (2024)

5 Tips For Heating a Victorian House With Energy Efficient Solutions (1)

As winter always causes a huge dip in the temperature, we’re sure you’ve already taken all the necessary measures to keep yourself warm this snowy season. However, when it comes to heating a Victorian house, the concept of heating can be slightly different. Moreover, with the Government’s initiative to reduce carbon emissions, the need for green, energy-efficient heating solutions has also increased.

In the midst of all this, finding an energy efficient Victorian house heating system can be a little more difficult than usual. Hence, as one of the leading suppliers of energy efficient heating solutions in the UK, we bring you this article.

Today, we are going to tell you all about some of the most energy-efficient heating solutions available to heat your Victorian home this year!

1. Ground or Air Source Heat Pumps

As incredible solutions for all your heating needs, ground source and air source heat pumps are becoming one of the most sought–after heating solutions. By effectively enhancing your home’s energy efficiency while also reducing your carbon footprint, these heating solutions are the way to go.

When using our high-quality air pumps, you can rest assured that your home will be warm for the winter while you also save a whole lot of energy and money. Moreover, you can also use our exceptional air source heat pumps for cooling during summer.

What’s more, with the latest boiler upgrade scheme, you can get vouchers for up to £6,000 on the purchase of our green heat pumps. Click here to learn more about the boiler upgrade scheme!

2. Solar Thermal Panels

Another great solution for obtaining energy efficient hot water all year round is the installation of solar thermal panels on your house. By effectively using solar energy to provide you with hot water, solar thermal panels can also work well with your current heating system.

Although this may not be the typical all-round heating solution you may be looking for, it certainly makes heating water easier and greener.

3. Biomass Boilers

Biomass boilers are widely known for their carbon-neutral quality. This is because the carbon emissions emitted by them are absorbed by growing plants.

On the other hand, biomass boilers, while being an efficient source of heating for your Victorian home, also act as a way to dispose of wood chips, pellets and other biomass waste.

By using biomass, these boilers can provide you with energy efficient heating during winter and ensure that your home stays warm for a long period of time.

4. Consider Glazed Windows

Here’s one of the best ways to insulate your Victorian house! Considering double or triple-glazed windows for your Victorian house is a brilliant way to trap the heat inside while also allowing light to enter. Glazed windows, if you do not know, are tightly fitted sashes that come with one, two or three glass panes inside!

Furthermore, depending upon the type of glazing you get, sometimes, the glass panes are filled with specialised gases—like argon—to trap more heat inside. Thus, not only do glazed windows stop cold from entering the house but they also prevent heat loss.

This, in turn, requires you to make less use of your heating system, leading to decreased energy bills and increased energy efficiency.

5. Underfloor Heating

When it comes to heating a Victorian house, underfloor heating is one of the most commonly chosen heating solutions!!

This is because underfloor heating can efficiently and evenly heat all areas of the house, without causing any cold or hot spots. Moreover, underfloor heating also allows greater flexibility and can effortlessly fit well with all home designs.

Finally, given the fact that it uses hot water piped through a grid, it saves a lot of energy, unlike other heating systems like radiators.

Choose JL Philips for Energy Efficient Heating Solutions

Now that you know all about heating a Victorian house with green heating solutions, it’s time for you to get in touch with us.

With years of experience as one of the leading domestic and commercial heat pump installation specialists in the UK, we bring you excellence.

Offering you a wide range of green heating solutions, ranging from air source heat pumps to solar PV panels to biomass boilers, we’ve got you covered.

What’s more, with our professional heating experts always available to you, we also offer you efficient heat pump installation and maintenance services.

To learn more about our services, click here or get in touch with us now!

5 Tips For Heating a Victorian House With Energy Efficient Solutions (2024)

FAQs

5 Tips For Heating a Victorian House With Energy Efficient Solutions? ›

Finding the Most Efficient Heating System: Heat Pumps. For homeowners who want the most efficient heating system available, heat pumps are the best candidate.

How can I make my old Victorian house energy efficient? ›

Easy ways to make an older home more energy efficient
  1. Seal air leaks with caulk and weatherstripping. ...
  2. Schedule a free energy audit. ...
  3. Upgrade to energy-efficient appliances and lighting. ...
  4. Keep air vents and radiators clear. ...
  5. Plant trees near your home. ...
  6. Install foam gaskets behind outlet and switch plates on walls.
Jul 5, 2023

What is the most efficient way to heat a house with electricity? ›

Finding the Most Efficient Heating System: Heat Pumps. For homeowners who want the most efficient heating system available, heat pumps are the best candidate.

How did Victorians warm their homes? ›

There was no central heating. Coal fires in every room would keep the house warm. Servants would do the work of the house.

How to efficiently heat a Victorian house? ›

Today, we are going to tell you all about some of the most energy-efficient heating solutions available to heat your Victorian home this year!
  1. Ground or Air Source Heat Pumps. ...
  2. Solar Thermal Panels. ...
  3. Biomass Boilers. ...
  4. Consider Glazed Windows. ...
  5. Underfloor Heating.

How can I improve my Victorian house? ›

You want to maintain, strengthen, extend while making sure the original structure and features are not damaged or lost.
  1. Repair brickwork and pointing. ...
  2. Look at the plasterwork. ...
  3. Restore/Replace sash windows. ...
  4. Work on the floor. ...
  5. Repair or replace the roof. ...
  6. Restore or repair the front path. ...
  7. Update your kitchen. ...
  8. Update your bathroom.
Aug 10, 2023

How did people heat their homes in 1800? ›

“Up through about 1800, the wood-burning fireplace—very popular with English settlers—was the primary means of heating a home,” explains Sean Adams, professor of history at the University of Florida and author of Home Fires: How Americans Kept Warm in the Nineteenth Century.

How did people keep warm in winter in 1800? ›

In addition to keeping active, people wore thick layers of woolen clothing and often slept in them along with flannel night shirts and caps on the coldest nights. Most people, including the wealthy, went to bed in unheated bed chambers.

How were Victorian homes insulated? ›

Many Victorians were built between the mid-1800s to the early 1900s during a unique time in the construction industry. Home insulation in that era mainly consisted of discarded paper, shredded textiles, and organic products like hay and wood shavings — not exactly great insulation by today's standards.

What is the most efficient heating source? ›

Electric: Electric furnaces run on electricity and are the most energy-efficient among the three. However, these systems can be the most expensive to operate. Gas: These furnaces use gas to produce heat. These are the second most efficient furnaces—but the most popular among homeowners.

What are the old types of heating systems? ›

Types of heating system in the 19th century included steam, low-pressure hot water and high- or medium-pressure hot water. Hot water heating boilers were manufactured in quantity from around 1860 onwards (see first illustration). The first room heaters were pipe coils, often housed in decorative cases.

How do you insulate an old Victorian house? ›

Victorian houses generally have suspended timber floors (boards laid over wooden joists). These can be insulated by putting either mineral fibre, another insulating material, or rigid insulation boards between the joists.

How do I lower the humidity in my Victorian house? ›

Installing extractor fans, drimaster eco systems or heat recovery units will help increase much needed ventilation and reduce condensation. Install extra air bricks to allow ventilation.

Top Articles
Latest Posts
Article information

Author: Merrill Bechtelar CPA

Last Updated:

Views: 5928

Rating: 5 / 5 (70 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Merrill Bechtelar CPA

Birthday: 1996-05-19

Address: Apt. 114 873 White Lodge, Libbyfurt, CA 93006

Phone: +5983010455207

Job: Legacy Representative

Hobby: Blacksmithing, Urban exploration, Sudoku, Slacklining, Creative writing, Community, Letterboxing

Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.