We’ve all been there. You’re in the kitchen, following a Traditional Fudge Recipe step by step, measuring out all the ingredients as you go, doing everything the recipe tells you. You finish making your Fudge and you leave it to cool before you beat it with a wooden spoon, however, your Fudge is not setting like the recipe says it should.
What equipment do you need to make Homemade Fudge?
First of all, it’s important to understand that if you use the wrong equipment when making Homemade Fudge, it may impact the overall quality! To effectively make delicious Homemade Fudge, you’ll need:
1. A heavy-bottomed pot with high sides
2. A wooden spoon (we use silicon but it has to be able to withstand temperatures of up to 260 degrees Fahrenheit)
3. A parchment-lined baking tray
4. A sugar thermometer or a jug of cold water
5. Patience and lots of it!
Why has my Fudge not set?
The main reasonis that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That’s why we recommend investing in a sugar thermometer. Another reasonyour Fudgeis not settingis that the ratio of liquid to sugaris too high.
How long does it take Fudge to set?
It usually takes around 3 hours for Fudge to fully set. Therefore, if you have followeda traditional Fudge recipe correctly and boiled your Fudge to the optimum temperature, once you have beaten your Fudge it will take around 3 hours until it is fully set. When you are making Fudge, you must be patient!
What to do if your Fudge doesn’t set?
The good news is that you’ve probably made an amazing thick Fudge sauce! You could use your sauce to pour over ice cream or if you wanted it a little thinner, add some heavy cream and reheat the sauce until it has all melted through.
We hope you enjoyed the second blog in our Homemade Fudge mini-series. Leave us a comment below, we’d love to hear from you!
FAQs
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
Why is my fudge not setting enough? ›
If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).
What to do when fudge is too runny? ›
If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.
What to do with failed fudge? ›
My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.
Why won't my 3 ingredient condensed milk fudge set? ›
This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.
How do you fix fudge that is too dry? ›
Fixing Fudge
- Scrape the fudge back into a large saucepan and add 1 1/2 cups of water.
- Stir the fudge over low heat until it dissolves. ...
- Increase the heat to medium and bring it to a boil, washing down the sides of the pan frequently with a wet pastry brush to prevent sugar crystals from forming.
You should mix the cream, butter, and sugar when making your fudge, but put down the spoon once it has reached its boiling point. Stirring while your sugar mixture is boiling will only form sugar crystals and make your fudge crunchy rather than silky smooth.
How do you make homemade fudge firmer? ›
The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.
Can I freeze fudge to make it set? ›
Once it's at room temperature, stick the fudge into the fridge for 1-2 hours. Lastly, to set fudge completely, put it in the freezer.
How do you add moisture to fudge? ›
Cut the fudge into small pieces around one inch and put it on the plate and place each fudge with the distance in between. Keep a bowl of water inside the microwave along with the fudge to create moisture for the pieces to inhale. Next, microwave the fudge pieces for just 10 seconds.
Undercooked. This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft.
Can you remelt homemade fudge? ›
OMG My fudge is grainy, what do I do? -
Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature. Heat slowly to begin with and make sure the mixture goes completely smooth before bringing it to the boil.
How long does fudge take to set? ›
Pour the fudge mixture into the prepared casserole dish and spread out in an even layer. Let the fudge rest at room temperature for 15 minutes before placing in the refrigerator, uncovered. Refrigerate until the fudge is firm, about 2-3 hours (or overnight), before slicing and serving.
How do you fix fudge that didn't set? ›
To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.
What makes fudge firmer? ›
Cooking is necessary to dissolve sugar crystals and to evaporate part of the water in the cream. The length of this step has a direct impact on the firmness of the fudge.
Why not heat condensed milk in can? ›
Sure enough, Carnation condensed milk comes with a warning: "Do not boil unopened can as bursting may occur." According to Serious Eats, when the boiling water evaporates, leaving the metal exposed, the can may warp, split, or yes, explode.
How do you make fudge firmer? ›
The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.
What would cause fudge not to harden? ›
Homemade Fudge Doesn't Always Set
If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.
What causes fudge to be too soft? ›
there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).
Can I set my fudge in the freezer? ›
If you have oodles of willpower and want to save your fudge for later, it freezes well. Wrap each slice (or the whole box) in foil or plastic wrap to seal it. You don't even have to defrost it – your fudge tastes just as scrumptious frozen and cuts easily with a knife, or better still, grate directly onto ice-cream.
