How to Prepare a Prime Rib Roast – Skip's On the Ridge (2024)

If you’ve never prepared aprime rib roastbefore, you might be intimidated to cook your first one this holiday season. But you shouldn’t be! Perhaps you have cooked prime rib before but you’re ready for some new ideas for the rub. Either way, keep reading and you’ll find this timeless Christmas tradition will leave your guests coming back again and again over the years.

1. Choose Your Rib Wisely

A well-chosen roast means you won’t have to stress about the extras as much. The phrase “prime rib roast” can be misleading, since it doesn’t refer to theUSDA’s grading methodfor prime cuts of meat. Prime rib actually indicates that the highest quality of meat from the rib was selected. At Skip’s, we can help you find meat that is most desirable.

Estimate how many people you’re expecting.

On average, each person will eat about three-fourths of a pound (or 12 oz.) of meat during an intimate, sit-down meal. If you’re planning a buffet-style get-together, average a half pound of boneless meat (8 oz.) per person. If you’d like bone-in prime rib, we recommend you purchase1 bone for every 2 adults for the holidays. The bones add weight and isn’t necessarily an edible part of the roast.

Select your bone-in prime rib.

We highly recommend bone-in rib roast as it renders a more succulent, juicy flavor. When you place the roast fat side up in the pan, the rib bones also serve as a roasting rack, so the meat doesn’t touch the bottom of the pan while it’s cooking.

Upon request, our butchers will also trim and tie the meat for you so you won’t have to worry about how to do it yourself. We can cut away the bones, trim the fat, and then tie the bones back together. We can also leave about one inch of fat on the bones to add to the flavor of the roast.

2. Prepare the Rub

You can season the roast a day in advance, but no later than 2 hours before cooking time. The seasoning needs time to flavor the meat while it’s raw. When you’re ready to season, you can pick from countless options for rubs.

First, cover the entire roast with olive oil – this will help give the exterior a flavorful, crusty texture. You can then keep it simple by mixing ¼ cup kosher salt with ¼ cup pepper and rubbing it all over the roast. If you want something a bit more fancy, consider these options:

Classic:

Mix together: ⅓ cup kosher salt; 3 Tbsp. dry mustard; 4 tsp. black pepper; 1 ½ tsp. garlic powder; 1 Tbsp. onion powder; 2 tsp. dried thyme; 2 tsp. dried oregano; 2 tsp. ground coriander; and 2 tsp. celery seeds. (Note: this will make more than you need, so use about 1/4 cup of the mixture and save the rest for the next big holiday!)

Sweet:

Mix: 2 Tbsp. black pepper; 2 Tbsp. kosher salt; 2 Tbsp. light brown sugar, packed; 1 Tbsp. dried oregano; and 1 tsp. smoked/sweet paprika.

Savory:

Combine: 3 cloves of garlic, crushed; ¼ cup Dijon mustard; ¾ cup chopped fresh parsley; 1 ½ Tbsp. fresh (or 1 ½ tsp dried) thyme leaves; and 1 ½ Tbsp. fresh (or 1 ½ tsp. dried) rosemary leaves.

Once you decide on your rub, simply sprinkle until the whole roast is covered. You can also slice 1 inch by ½ inch into the fat side of the roast to help the flavor of the rub penetrate deep into the meat.

3. Cook the Rib

Before you cook the rib, make sure the roast is at room temperature, so remember to remove the roast from the fridge at least two hours before you plan on putting it in the oven. Preheat the oven to 450°F.

Place the roast fat side up, bone side down, in a large roasting pan. Cook for 15 minutes, then reduce the oven temperature to 325°F. This allows the heat to sear the roast, trapping the juicy flavors inside while the rest of the meat cooks. On average, each pound of rib needs 15 minutes to cook (i.e., a 4 lb. roast needs to cook for 1 hr. after the temperature has been reduced).

For absolute accuracy, purchase a meat thermometer. Some versions remain in the meat as it cooks, while others are removable, but either will help you know when the roast is fully cooked. The thermometer should read 110°F before you pull it out of the oven.

After you pull it out, cover it loosely with aluminum foil and let it rest for 20 minutes. The roast will continue to cook, raising the internal temperature to about 130°F. This allows the flavor from the juice to settle over the entire roast.

At this point, simply remove the foil, cut the ties, and serve this unforgettable, medium rare prime rib roast to your hungry guests! Some perfect sides are creamed spinach, green bean casserole, mashed potatoes, and dinner rolls.

Want to place an order for your prime rib roast?Order onlineor call 585.865.3896 for any occasion!

How to Prepare a Prime Rib Roast – Skip's On the Ridge (2024)

FAQs

How to Prepare a Prime Rib Roast – Skip's On the Ridge? ›

Bone-in Prime Rib Roast: Roast in oven at 350°F for 20–24 minutes per pound, depending on desired final temperature. Boneless Prime Rib Roast: Roast in oven at 350°F for 18–22 minutes per pound, depending on desired final temperature.

What is the most important thing to do before roasting a prime rib roast? ›

Let it sit on the counter for 4 hours before cooking. Bringing the roast to room temperature is especially important here because a cold roast will take much longer to cook.

How do restaurants make prime rib so tender? ›

How do restaurants make prime rib so tender? The secret to restaurant-style prime rib is cooking the meat super slow at low temperatures. I recommend cooking prime rib at no higher than 200 degrees F. This cooks the meat very slowly, turning the fat into butter and rendering the proteins juicy and soft.

What is the best temperature to cook a prime rib roast? ›

Brown the roast at 500°F (or as high as your oven will go) for 15 minutes. Lower the oven to 325°F to finish roasting: Reduce the oven temperature to 325°F. Roast in the oven until the thermometer registers 115°F for rare or 120° for medium rare, and 130°F for medium.

Is it better to cook prime rib at 325 or 350? ›

Start by cooking your prime rib at 500°F for 15 minutes and then lower the oven temperature to 325° F and cook for 10-12 min per pound for rare, or 13-14 min per pound for medium rare, or 14-15 min per pound for medium well. A meat thermometer is essential to ensure you cook it perfectly!

Should I put water in the bottom of my prime rib roast? ›

This will allow the meat to cook more evenly. Preheat the oven to 450°F. Pour 1-2 cups of water or beef broth in the bottom of a roasting pan. As the fat from the roast drips into the pan as it cooks, this will prevent it from burning in the bottom of the pan.

Do you cook prime rib covered or uncovered? ›

Keep the rib roast uncovered while you cook it to allow it to brown on the outside. You can also give it a little extra sear in a hot pan for a few minutes on each side after it's finished roasting.

Should I season prime rib the night before? ›

Rule #7: Season Well, and Season in Advance

For best results, salt your prime rib on all surfaces with kosher salt at least 45 minutes before you start cooking it, and preferably the day before, leaving it in the fridge uncovered overnight. Initially, the salt will draw out some moisture and end up dissolving in it.

Should I sear prime rib before roasting? ›

We recommend a low, slow cook preceded by a good sear.

What makes prime rib so delicious? ›

Prime rib has a large “eye” of meat in the center, which is juicy, tender, and marbled with fat. This eye has a fat-marbled muscle around it, and the whole thing is surrounded by a thick cap of fat. This means that prime rib is tender, juicy, and extremely flavorful because the muscles aren't heavily used.

Is prime rib cooked rib side up or down? ›

Place the roast fat side up, bone side down, in a large roasting pan. Cook for 15 minutes, then reduce the oven temperature to 325°F. This allows the heat to sear the roast, trapping the juicy flavors inside while the rest of the meat cooks.

How to add flavor to prime rib? ›

The Best Prime Rib Seasoning Rub

Combine 6 finely chopped garlic cloves, 1/2 Tbsp salt, 1/2 Tbsp black pepper, 1 tsp chopped fresh rosemary leaves, 1/2 tsp chopped fresh thyme leaves, and 3 Tbsp light olive oil. It's even better if you let it sit for 5 minutes for the flavors to meld.

How do you prepare prime rib before cooking? ›

Instructions
  1. Remove the roast from the fridge 2 hours before cooking and season with salt. ...
  2. Make the horseradish sauce (optional). ...
  3. Heat the oven to 500°F. ...
  4. Oven-sear the roast for 15 minutes. ...
  5. Reduce the oven temperature to 325°F and cook for 13 minutes per pound. ...
  6. Rest the roast before carving. ...
  7. Carve the roast.

Should you season prime rib the night before? ›

Rule #7: Season Well, and Season in Advance

For best results, salt your prime rib on all surfaces with kosher salt at least 45 minutes before you start cooking it, and preferably the day before, leaving it in the fridge uncovered overnight. Initially, the salt will draw out some moisture and end up dissolving in it.

How long should prime rib sit out before roasting? ›

Pull the rib roast out of the fridge and let temper on the counter for three hours. USDA guidelines requires food not be held above 33°F (1°C) for more than 4 hours. A three-hour rest on the counter is well within time constraints.

Top Articles
Latest Posts
Article information

Author: The Hon. Margery Christiansen

Last Updated:

Views: 6035

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: The Hon. Margery Christiansen

Birthday: 2000-07-07

Address: 5050 Breitenberg Knoll, New Robert, MI 45409

Phone: +2556892639372

Job: Investor Mining Engineer

Hobby: Sketching, Cosplaying, Glassblowing, Genealogy, Crocheting, Archery, Skateboarding

Introduction: My name is The Hon. Margery Christiansen, I am a bright, adorable, precious, inexpensive, gorgeous, comfortable, happy person who loves writing and wants to share my knowledge and understanding with you.